Safety/Protection Devices - Nakanishi KOLEC FX15WT Instruction Manual

2. Basic instructions

Safety/protection devices

This forklift is equipped with the following safety devices and additional protection devices. During operation of the
forklift, these devices must not be removed.
No. in the drawing Safety/protection device
1
Emergency stop button
2 Alarm (Horn)
Pinch accident
3
prevention switch
4
Guard
Excessive flow shutoff
5
valve
6 Sling eyehole
5
Appearance
1
6
Pressing the emergency stop button turns OFF the
power supply.
When you reset the emergency stop button, be sure to
ensure safety in advance.
Pressing this button turns on the horn.
When an operator is almost pinched between the
handle and a wall, this switch is pressed with the body,
so that the forklift moves backward to prevent the body
from being pinched.
(Even if this switch is pressed while the forklift is
moved backward, it does not move forward.)
The guard prevents the operator's feet from entering
the bottom of the vehicle, so that the feet will not be
caught by the vehicle body or front wheel.
When the hydraulic flow rate becomes abnormally
large, the shutoff valve is activated to limit the flow rate
to prevent abrupt fall of the fork.
When slinging the vehicle body, sling hooks can be
attached to the eyeholes. Using the eyeholes enables
sling work to be securely conducted.
2
3
4
4