Table of Contents
Advertisement
4. Handling Procedure
Braking position
Traveling
position
Braking position
Swing operation
Turning the handle swings the forklift. Increasing the handle turn angle reduces the swing radius. If you turn
the handle steeply during travel, the traveling speed automatically lowers.
Swing operation during forward travelling
When the forklift travels forward (toward the handle), the relation between the handle turn direction and the
forklift swing operation is as shown below.
Swing operation during backward travelling
When the forklift travels backward (toward the fork), the relation between the handle turn direction and the
forklift swing operation is as shown below.
Stop operation
To activate the brake, release the traveling knob, and move the
steering handle to the vertical or lowest position. Be sure to lower
the traveling speed before the stop procedure.
Traveling on slope
To move the forklift up/down on a slope, the operator must be at a
lower position. If the fork is at the lower position, the cargo may slip
and fall.
29
Advertisement
Table of Contents
