Table of Contents
Advertisement
4. Handling Procedure
80%
100%
(6) Turn ON the power supply switch of the charger.
Turning ON the power supply switch of the charger starts charging.
The "ON" indicator lamp at the left top of the charger lights.
After approx. 10 seconds, the indicator lamp and information
display window of the charger will turn on in sequence.
When the battery is charged by 60%, the "60%" indicator lamp is lit in
green.
When the battery is charged by 80%, the "80%" indicator lamp is lit in
red.
Charging time
When the battery is discharged by 80%, the charge time is 9 to 12
hours.
(7) Completion of charging
When the "100%" indication lamp is lit, the charger automatically stops
charging.
After completion of charging, turn OFF the power supply switch of the
charger.
If the power supply switch remains ON after the battery is fully charged,
the charger will restart charging at elapse of 24 hours.
(8) Reconnect the plugs.
After completion of charging, disconnect the charge plug of the charger
from the battery plug, and connect the battery plug to the plug of the
vehicle body.
(9) Disconnect the power supply cable.
Disconnect the power supply cable from the outlet.
(10) Close the battery cover.
41
Advertisement
Table of Contents
