At End Of Work - Nakanishi KOLEC FX15WT Instruction Manual

4. Handling Procedure

At end of work

WARNING
Do not park the forklift on a slope.
If the forklift is parked on a slope, it may unexpectedly move, and collide with a building and surrounding
object, resulting in damage to these objects. Also, it may collision with a person.
Turn OFF the key switch.
If the key switch is not turned OFF, a person may accidentally touch the operating part without noticing
that the forklift is ready to start. In this case, the forklift unexpectedly starts running, resulting in a
collision accident, etc.
Remove the key, and keep it.
If an operator leaves the forklift with the key being inserted, a person unauthorized for the forklift
operation or a person that has not been familiarized with this forklift may operate it. In this case,
operation delay or operation error may occur, resulting in a collision accident. Remove the key, and keep
it.
CAUTION
Restore the fork to the lower stroke end.
Restore the fork to the lower stroke end. If the fork is left at an elevated position, it may accidentally
collide with a person, resulting in injury. Also, it causes collision with other vehicles.
Parking
To park the forklift after completion of work, follow the procedure below:
(1) Set the mast vertical.
(2) Lower the fork to the lower stroke end.
(3) Return the steering handle to the vertical position.
(4) Turn OFF the key switch, and remove the key.
37