Table of Contents
Advertisement
3. Safety Precautions
WARNING
Be sure to conduct periodic parts replacement.
If the forklift is kept running without replacement of the periodic replacement
parts, wear or deterioration of the parts may result in strength deterioration and
malfunction of the forklift, causing an accident. Be sure to replace the periodic
replacement parts at specified intervals.
CAUTION
Use the specified genuine fuse.
Using a fuse other than the genuine fuse results in overcurrent, causing burnout
of parts, fire and electric shock. Be sure to use the specified genuine fuse.
WARNING
Use genuine parts.
If the genuine parts are not used, the parts and equipment may fall because of
insufficient strength, and in the worst case, the forklift may overturn. In such a
case, you may suffer injury.
CAUTION
Before handling a large component and equipment, check the weight.
When removing a large component or equipment, check its weight in advance.
If the weight check is omitted, the worker may drop the component or equipment
because it cannot be held by hand when the weight is larger than expected.
During sling work, if a component or equipment is too heavy to sling, it may fall
and collide with a person, resulting in injury. Also, the large component or
equipment may collide with the forklift and floor, resulting in damage to these
objects.
WARNING
Before start of work, take fall preventive measures.
Before handling the fork or other equipment that may fall, take fall preventive
measures by using a safety column, safety block, etc. If the equipment falls, it
may collide with a person, resulting in serious injury.
WARNING
When jacking up the forklift, observe the safety instructions.
When jacking up the forklift, observe the basic safety instructions. (Use a jack on
a level, rigid base, use a jack with sufficient jacking capacity, etc.)
22
Advertisement
Table of Contents
