Equipment Damage Due To Electric Fields Or Electrostatic Discharge - Siemens SIMOTICS T-1FW68 Configuration Manual

Fundamental safety instructions

1.2 Equipment damage due to electric fields or electrostatic discharge

Burn injuries caused by hot surfaces
In operation, the motor can reach high temperatures, which can cause burns if touched.
• Mount the motor so that it is not accessible in operation.
Measures when maintenance is required:
• Allow the motor to cool down before starting any work.
• Use the appropriate personnel protection equipment, e.g. gloves.
1.2 Equipment damage due to electric fields or electrostatic
discharge
Electrostatic sensitive devices (ESD) are individual components, integrated circuits,
modules or devices that may be damaged by either electric fields or electrostatic
discharge.
NOTICE
Equipment damage due to electric fields or electrostatic discharge
Electric fields or electrostatic discharge can cause malfunctions through damaged
individual components, integrated circuits, modules or devices.
• Only pack, store, transport and send electronic components, modules or devices in
• Only touch components, modules and devices when you are grounded by one of the
• Only place electronic components, modules or devices on conductive surfaces (table
18
CAUTION
their original packaging or in other suitable materials, e.g conductive foam rubber of
aluminum foil.
following methods:
– Wearing an ESD wrist strap
– Wearing ESD shoes or ESD grounding straps in ESD areas with conductive
flooring
with ESD surface, conductive ESD foam, ESD packaging, ESD transport container).
1FW68 radial segment motors
Configuration Manual, 08/2021, A5E51132930B AA