Korg D1200 Owner's Manual page 138

P4EQ
(Parametric 4band EQ)
Fc1 (Band1 Cutoff [Hz]) ............... 20...1.0kHz Sets the center frequency of Band 1
Q1 (Q)............................................. 0.5...10.0 Sets the bandwidth of Band 1
G1 (Gain [dB]).............................–18...+18dB Sets the gain of Band 1
Fc2 (Band2 Cutoff [Hz]) ............... 50...5.0kHz Sets the center frequency of Band 2
Q2 (Q)............................................. 0.5...10.0 Sets the bandwidth of Band 2
G2 (Gain [dB]).............................–18...+18dB Sets the gain of Band 2
Fc3 (Band3 Cutoff [Hz]) ........... 300...10.0kHz Sets the center frequency of Band 3
Q3 (Q)............................................. 0.5...10.0 Sets the bandwidth of Band 3
G3 (Gain [dB]).............................–18...+18dB Sets the gain of Band 3
Fc4 (Band4 Cutoff [Hz]) ........... 500...20.0kHz Sets the center frequency of Band 4
Q4 (Q)............................................. 0.5...10.0 Sets the bandwidth of Band 4
G4 (Gain [dB]).............................–18...+18dB Sets the gain of Band 4
Trim ..................................................... 0...100 Sets the parametric EQ input level
Exctr
(Exciter)
Blend (Exciter Blend) .................. –100...+100 Sets the intensity (depth) of the Exciter
Empha (Emphatic Point) ..................... 0...140 Sets the frequency range to be empha-
EQ Trim ............................................... 0...100 Sets the EQ input level
LEQG (Pre LEQ Gain [dB]).........–15...+15dB Sets the gain of Low EQ
HEQG (Pre HEQ Gain [dB])........–15...+15dB Sets the gain of High EQ
Wah
This produces a wah effect. It can be controlled using an expres-
sion pedal.
FcBtm (Frequency Bottom)................. 0...100 Sets the lower limit of the wah center fre-
FcTop (Frequency Top) ....................... 0...100 Sets the upper limit of the wah center
*Mode (Sweep Mode).................... Auto, Pedal Switches between auto-wah/pedal con-
LFOlvl (LFO Level) ............................. 0...100 Sets the LFO level that is added to con-
*Speed (LFO Frequency [Hz]) ....0.02...20.0Hz Sets the LFO speed
Reso (Resonance).............................. 0...100 Sets the resonance amount
LPF (LPF) ...........................................Off, On Switches the wah low pass filter on and
:Mode
If you wish to use an expression pedal to control the Wah, select
"Pedal" ( p.141).
Filter
This is a filter with resonance, whose frequency can be moved
by an envelope.
Type (Filter Type).....................LPF, BPF, HPF Selects the filter type
Sens (Sensitivity) ................................ 0...100 Sets the sensitivity
Attack (Attack)..................................... 1...100 Sets the attack level
Manual (Manual) ................................. 0...100 Sets the frequency to which the effect is
Reso (Resonance).............................. 0...100 Sets the resonance amount
Polrty (Polarity) ........................................ +, – Sets the polarity
AmpSim
(AmpSimulator)
This effect simulates the acoustical characteristics of a guitar
amp. Even if you are recording your instrument via a direct
line, you can produce a realistic sound as though a guitar amp
were actually being used.
Type (Amplifier Type)....................... AMP1...5 Selects the type of guitar amplifier
136
effect
sized
quency
frequency
trol
trol
off
applied
CabRes
(CabinetResonator)
This effect simulates the acoustical characteristics and cabinet
resonances of a guitar amp speaker cabinet.
The "AmpSimulator" is ideal for direct recording.
Type (Cabinet Type).................. 1 8, 1 10,
1 12, 2 12,
4 10, 4 12
Depth...................................................0...100 Sets the depth of the effect
Tone
This effect simulates the tone control section of a guitar amp. It
allows you to adjust the character of the vacuum tubes.
Bass (Bass) .........................................0...100 Sets the low-frequency level
Middle (Middle)....................................0...100 Sets the middle-frequency level
Treble (Treble)......................................0...100 Sets the high-frequency level
Tube (Tube Type) ................... SS, 1-99, Burn! Character of the vacuum tubes in the
Cabinet
This effect models the speaker cabinet of a guitar amp.
Type (CabinetType) .................................... *1 Cabinet type
Air ..........................................................0-100 Models the effect of the air
Level......................................................0-100 Output level
Presnc (Presence)...............................0...100 High-frequency level
*1: 1x8TW(Tweed), 1x12T(Tweed), 1x12B(Black), 1x12V(Vox), 2x12B(Black),
2x12V(Vox), 2x12C(ClassicA), 4x10T(Tweed), 4x12C(Classic), 4x12V(Vintage),
4x12M(Modern), FullR(FullRange)
Gate
Thrshl (Threshold) ...............................0...127 Sets the level at which the effect begins
Attack (Attack) .....................................1...100 Sets the attack time
Relse (Release)...................................1...100 Sets the release time
Respo (Response) ..............................1...100 Sets the speed at which the effect will
DeEss
(Deesser)
This effect attenuates unwanted sibilants in a vocal signal.
Sense (Sensitivity)...............................0...100 Sets the sensitivity
Fc (Side Band EQ fc) ...............500...20.0kHz Sets the center frequency of the side
Q (Side Band EQ Q)...........................0.5...10 Sets the bandwidth of the side band EQ
Gain (Side Band EQ Gain)......... –18...+18dB Sets the gain of the side band EQ
Ratio (Ratio) .....................1.0:1...50.0:1, Inf:1 Sets the signal compression ratio
Thrsh (Threshold [dB]) ................... –40...0dB Sets the level above which the compres-
Attck (Attack) .......................................1...100 Sets the attack time
Relse (Release)...................................1...100 Sets the release time
Level (Gain Adjust [dB])...... –Inf, –38...+24dB Sets the output gain
Cho/Fl
(Chorus/Flanger)
This effect gives a sense of pitch movement and depth to the
sound. Adjusting the delay time will change the effect signifi-
cantly.
DTime (Delay Time) .................. 0.0...50.0ms Sets the delay time
LFO (LFO Waveform) ....................... TRI, SIN Selects LFO Waveform
*Speed (LFO Frequency) .......... 0.02...20.0Hz Sets the LFO speed
*Depth (Depth) ......................................0...100 Sets the depth of LFO modulation
Fdback (Feedback)......................–100...+100 Sets the feedback amount
Trim (EQ Trim) .....................................0...100 Sets the EQ input level
LEQG (Pre LEQ Gain [dB]) ........ –15...+15dB Sets the gain of Low EQ
HEQG (Pre HEQ Gain [dB]) ....... –15...+15dB Sets the gain of High EQ
Mode (Output Mode) ............... Normal, Invert Selects the output mode for the chorus/
Selects the type of cabinet
power amp section of the guitar amp
to apply
respond to change in the input
band EQ
sor is applied
flanger