Playback - Korg D1200 Owner's Manual

• Repeat this procedure to find the best take.
If you are satisfied with the selected take, press the
[YES/OK] key to return to the previous screen.
If you want to select the most recent recording, select the
"Redo" button and press the [ENTER] key to return to
the "Level00" take.

2. Playback

This page explains how to perform basic playback, and how
to use program playback.
2-1. Playback
1 Select the track(s) that you want to play.
For each track that you want to play, press the [TRACK
STATUS] key to set it to PLAY mode (LED lit green).
2 Move to the counter location from which you want to
play.
For details on how to move to a new location, refer to
p.32.
3 Begin playback.
Press the [PLAY] key. (The [PLAY] LED will light.)
• Apply EQ to the playback. ( p.37)
• Adjust the level and pan of the playback. ( p.37)
• Apply effects to the playback. ( p.42)
• Play the built-in rhythm along with the playback.
( p.48)
4 Stop playback.
Press the [STOP] key. (The [PLAY] LED will go dark.)
Even if there is no more audio, playback will not stop
until you press the [STOP] key.
You can also use a PS-1 foot switch (sold separately) to
start or stop playback ( p.101).
2-2. Program playback
This function lets you play two or more songs in the order
you specify.
It is convenient to use this when recording to DAT or MD.
To create a program play list
1 Access the [SONG] "PrgPlay" tab page.
2 Select the song you want to play first.
Use the scroll buttons to select "01" in the program play
list, and turn the [VALUE] dial to choose a song.
3 In the same way, select the second and following songs.
To delete a song from the program play list, select that
song and turn the [VALUE] until it reads "- - -".
The program play list will be preserved until you turn
off the power.
56
To play back a song program list
1 Access the [SONG] "PrgPlay" tab page.
2 Press the [PLAY] key to begin playback.
The programs will play in the order of the list, starting
with the first song.
During playback, you can press the [FF] key to move to
the next song. Pressing the [REW] returns you to the
begining of the current song. If you are already at the
begining of the current song, pressing the [REW] key
will move to the beginning of the previous song.
3 Press the [STOP] key to stop playback.
You can use "program list playback" only while the
"PrgPlay" tab page is displayed.
2-3. Other types of playback
Playing back a different virtual track
As described in "1-2. Switching the virtual track for
recording" ( p.53), select a virtual track that you
recorded, and play it back.
Loop playback
This repeatedly plays the IN–OUT region of the song.
This lets you check the contents of that region, or can be
used in conjunction with auto-punch recording to per-
form loop recording. ( p.54)
1 Select the track(s) that you want to play.
For each track that you want to play, press the [TRACK
STATUS] key to set it to PLAY mode (LED lit green).
2 Register the region (IN–OUT) that you want to loop.
( p.33, 118)
These settings can also be made in [LOOP] "Loop" or in
[AUTO PUNCH] "AtPunch" tab page "Wave."
3 Access the [LOOP] "Loop" tab page, and turn the
"Loop" button "On."
4 Begin loop playback.
When you press the [PLAY] key, playback will begin at
the IN point, and the IN–OUT region will play repeat-
edly.
5 Press the [STOP] key to stop playback.