Modeling 2; Insert Effect; Insass: Specify The Insert Location And Type Of The Insert Effects - Korg D1200 Owner's Manual

You can also select the type by moving the cursor to
"CABINET" and turning the [VALUE] dial.
5. Factory Data.....................................................
Returns the selected modeling effect to the factory set-
tings.

Modeling 2

If you want to make more detailed adjustments, move the
cursor to "DRIVE," "TONE," or "CABINET," and press the
[ENTER] key.
As an example, here are the settings that will appear if you
select "DRIVE."
2
1. Exit...................................................................
Returns to the Modeling 1 screen.
2. DRIVE .............................................. [001...100]
Adjusts the depth of distortion.
• Turn the knob located below "DRIVE" to adjust the
setting.
• You can also adjust the setting by moving the cursor
to "DRIVE" and turning the [VALUE] dial.
3. LEVEL............................................... [000...100]
Adjusts the volume of the effect.
• Turn the knob located below "TONE" to adjust the
setting.
• You can also adjust the setting by moving the cursor
to "TONE" and turning the [VALUE] dial.
4. NR(NoiseReduction).............................. [01...80]
Adjusts the level at which noise reduction is applied.
• Turn the knob located below "CABINET" to adjust
the setting.
• You can also adjust the setting by moving the cursor
to "CABINET" and turning the [VALUE] dial.
1
3 4

INSERT EFFECT

You can apply insert effects to analog input sources as you
record them, or to the playback of a tracks.
On the D1200 you can use up to eight insert effects simulta-
neously.
Insert effects cannot be used if "DigiIn" has been turned
"On" in the [INPUT/OUTPUT/SOLO] "Ch1–6" or
"Ch7–12" tab page.
InsAss: Specify the insert location
and type of the insert effects
1
2
1. Assign ......................... [In(Input), Trk(PlayTrack)]
Selects whether the insert effect will be applied to the
analog input or to a playback track.
In (Input): Select this when you want to apply an effect
to the analog input from an [INPUT 1/GUITAR IN]–
[INPUT 4] jack.
Trk (PlayTrack): Select this when you want to apply an
effect to a playback track.
2. SelectEffType .....................................................
[1in2outx2, 2in2outx2, 1in1outx4, 1in1outx8]
Selects the structure of the insert effects.
The available effect programs will depend on this set-
ting. For the effects that are available with each struc-
ture, refer to "Effect Program List" ( p.154).
1in2outx2 or 1in1outx2: Select this when you want to
use two mono-in/stereo-out effects.
This is ideal when you want to add spaciousness to a
lead guitar or vocal. The effects can also be used as 1-in/
1-out monaural effects.
You cannot select this if "Assign" is set to "Trk."
2in2outx2: Select this when you want to use two stereo-
in/stereo-out effects.
This is ideal for use with stereo input sources such as
keyboard.
1in1outx4: Select this when you want to use four mono-
in/mono-out effects.
This is ideal for sources with a fixed pan position, such
as rhythm guitar.
1in1outx8: Select this when you want to use eight
mono-in/mono-out effects.
This is ideal for sources with a fixed pan position, such
as drums.
You cannot select this if "Assign" is set to "In."
Reference
4
3
85