Hisense I6433C7 Instructions Manual page 34

Two-phase connection
• If your electric mains have 2 line conductors and 1 neutral conductor, connect the appliance as
shown in Diagram B.
• If your electric mains have 2 line conductors and 2 neutral conductors, connect the appliance as
shown in Diagram C.
L1 = brown
L2 = black
N = blue
= yellow/green
Connecting the appliance 30 cm
Connection diagram
34
L1 = brown
L2 = black
N1 = blue
N2 = grey
= yellow/green
only for NL!
The circuit should be fitted with a fuse of at least 16 A.
Appliances with a width of 30 centimetres (two cooking zones) only allow
single-phase connection. The cross-sectional area of the power cord
core should be at least 1.5 mm²!
1. Check the voltage. Before connecting the
appliance, make sure the voltage specified
on the rating plate conforms to the voltage
of your power mains. The voltage of your
power mains (220 240 V between L and N)
should be checked by an expert using an
appropriate measuring device.
2. Open the cover of the connection terminal
box.
3. Connect the wires according to your type
of appliance.