Table of Contents
Advertisement
Available languages
Available languages
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the
power tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and control of
the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specific safety warnings for multi-tools
•
This electric hand tool is intended for sawing, sanding, polishing and cutting.
Read all safety warnings, instructions, illustrations, and specifications provided with
this tool. Neglecting to follow all of the instructions listed below can result in electric shock,
fire and/or serious injury.
•
Do not use accessories which are not intended to be used with this tool and which are
not recommended by the manufacturer. Even if the accessory can be attached to your
power tool, there is no guarantee that it can be used safely.
•
Wear personal protective equipment. Depending on how you use the machine; use
a visor/face protection or safety glasses. If necessary use a mask, ear protection,
gloves, and apron/work clothing to protect you from small shards of metal or splinters
from the work object. The eye protection you use must be able to protect against
flying debris produced in different working positions. The breathing protection should
be able to filter any particles produced by the work. Prolonged exposure to high levels of
noise can result in hearing damage.
•
Keep children at a safe distance from the work area. Everyone who visits the place
of work must wear personal protective equipment. Debris from the workpiece or from
a damaged accessory can fly off and injure people outside of the immediate work area.
•
Only hold the power tool by its insulated gripping surfaces when working in situations
where the tool could cut through hidden cables or its own mains lead. Tools which
come in contact with a live cable can electrify metal parts of the power tool and subject
the user to an electric shock.
•
Regularly clean the motor's ventilation ports. The motor's fan pulls in dust, which gets
inside the outer casing and a build up of this collected metal dust can lead to electrical dangers.
•
Do not use the power tool near flammable material. Sparks can easily ignite flammable material.
•
Do not use accessories, which require liquid coolants. The use of water or other liquid
coolants can result in electric shock or electrocution.
Advertisement
Table of Contents
