Product Safety Symbols - Cocraft HMT300 Original Instructions Manual

Specific safety instructions for sanding
•
Extra caution should be taken when sanding lead paint, wood, metal or other materials
which produce toxic dust. Make sure any bystanders in the work area are well protected.
• Remember that dust caused by sanding can be very flammable when mixed with air.
• Hold the power tool by insulated gripping surfaces, because the sanding surface may
contact its own cord. Cutting a "live" wire may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Safety instructions specific for cutting
• Hold power tool by its insulated gripping surfaces when performing an operation
in where the cutting accessory may contact hidden wiring or its own cord could
cut through hidden cables or its own cord. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give the operator
an electric shock.
• Always wear a dust mask.
Vibration
• The measurement of the vibration emission level declared in this instruction manual has been
carried out in accordance with a standardised test method described in EN 60745 and can
be used for comparing one power tool with another.
• The measurement method may also be used for a preliminary assessment of vibration exposure.
• The declared vibration emission level applies when the power tool is used in accordance with
this instruction manual. If however, the power tool is used for other purposes and with other
accessories or has not been properly maintained, the vibration emission level could increase
significantly over the total working period.
• For an exact assessment of the vibration exposure, the times when the tool is switched off
or running idle should also be taken into account. This significantly reduces the vibration
exposure over the total working period. Decide upon safety measures to protect the operator
from the effects of vibration during all types of use.

Product safety symbols

Read the entire instruction manual.
Always use ear defenders, respiratory protection and safety glasses or a visor.