Erasing Several Tracks At A Time - Kenwood MDX-01 Instruction Manual

Erasing several
tracks at a time
Use the following procedure to select up to
32 tracks you want to erase and erase them
together. The track numbers are adjusted
automatically.
Image of erasing several tracks
A B C
A B
CLEAR/
100 0
& ()
QZ
DELETE
SPACE CHARAC.
P.CALL
4
SET
ENTER
TUNING
DOWN
CD /
ENTER
REPEAT MD /
RANDOM
SOUND SLEEP
Remote control only
1
Select the MD input and in-
sert a recordable MD.
If the MD is already playing, press the 7
STOP key to stop playback.
2
Press the TRACK EDIT key repeat-
edly until "3 Q. ERASE ?" is dis-
played, then press the SET key.
If "X Q.ERASE" is displayed, the subsequent
operation will not be available (see page 53).
D E F
C D
POWER
/
TITLE SEARCH
TITLE INPUT
TRACK EDIT
10
TRACK EDIT
:
CLEAR
PGM
/DELETE
SET
¢
TUNING
UP
FM/AM
STOP
MD O.T.E.
AUTO/MANU.
DISPLAY
7 STOP
TIMER TIME DISPLAY
3
Press the 4 or ¢ key re-
peatedly to select one of the
tracks to be erased.
Select other tracks to be erased by repeating
this step for each.
Select "ALL" if you want to erase all tracks in
an MD.
Number of tracks to be erased
Track No.
If you commit a mistake, press the CLEAR/
DELETE key to clear the track number and
restart selection.
4
Press the ENTER key.
5
Press the ENTER key again.
It takes a while until the editing completes.
6
Eject the MD.
"WRITING" is displayed.
To cancel the Q. ERASE operation in
the middle:
Press the TRACK EDIT key any time before
the end of step 4.
Editing can be canceled provided that it is
attempted before "WRITING" is displayed.
For the procedure, see "Canceling editing"
(page 44).
÷ Be careful not to apply vibration to the unit while
"WRITING" is displayed, because the MD recorder
is writing recorded and edited data in the MD in
this period. Also, to avoid loss of recorded and
edited data, do not unplug the power cord before
"WRITING" disappears.
43
EN