H2I ONEOF Accuracy Motion User Manual page 7

2.2.2.1 Mechanical hazards
There is a risk of entrapment. Be careful not to leave your hand between the head and the
base of the device during operation.
2.2.2.2 Electrical hazards
It is forbidden to open the device in any way.
A faulty main power supply (outside the range specified in the device features section) or
a faulty cable can damage the device. If it is necessary to use the 2nd usb port, a
standard usb charger (5v) can be used.
To turn the power off, disconnect the power cable by pulling on the connector, never pull
directly on the cable.
2.2.3 Safety symbols
No specific signage is required for the Accuracy Motion.
If technical developments involve risks, symbols are placed on different parts of the device to
draw attention to a potential danger, to prohibited operations or to the obligation to wear safety
equipment.
2.2.3.1 Alert symbols
Symbol
2.2.3.2 Obligation Symbols
Symbol
Description
ATTENTION :
Warning (general), consult documentation.
Description
Mandatory instructions:
Only persons who have been trained in the handling of the device and who
know these instructions may work on it.
Safety and environment 6|36