Using The Application; Accuracy2 Interface - H2I ONEOF Accuracy Motion User Manual

6.

Using the application

6.1

Accuracy2 interface

To use the Accuracy Motion correctly, it is important to understand the different areas that
make up the application window.
FIG. 6-1 - Accuracy Motion (User interface areas)
(1) Application settings control area
(2) Results or listing area
(3) Editing area
The editing area windows (3) can be shown or hidden
6.1.1 Description of the contextual menu tabs (5)
Accuracy
The Accuracy tab is dedicated to device overview and control. The Accuracy2 application
allows simultaneous control of multiple devices from the ONEOF® range. All connected devices
are displayed directly on the screen in the accuracy window. From there you can start
measurements, sequences and access all current data of your measurement.
[See Accuracy Tab, page 14]
Parameters
The Parameters contain the data about the watch you want to measure (frequency, lift angle,...)
but also how you want to measure it (how much integration time, stabilization,...). A
measurement cannot be made without parameters. There is always at least one set of built in
parameters called "default" that is used in situations where no parameters have been chosen.
[See Measurement parameters tab, page 23]
Criteria
The Criteria are used to control the way measures are displayed.
[See Criteria tab, page 29]
(4) Control area
(5) Contextual menu area
Using the application 13|36