H2I ONEOF Accuracy Motion User Manual page 27

6.4.2 Sequence tab
The Sequences window is organized according to the following illustration:
FIG. 6-15 - Accuracy Motion (Sequences)
(1) Sequences command bar
(2) Sequences actions list
(3) Operations editing area
6.4.2.1 Create a measurement sequence:
A. Click on the ADD button on the Sequences command bar (1). The software will ask you to
select the type of device you want to create the sequence with.
B. Select Accuracy Motion.
C. If you want to change the name of your sequence, you can do so in the Operations editing
area (3) if no Operation (2) is selected.
6.4.2.2 Add operations to the sequence:
FIG. 6-16 - Accuracy Motion (Add operations)
You can choose to create a New rotation operation or a New static operation by hitting the
ADD button (1).
(4) Operation control bar
(5) Sequences list
Using the application 26|36