6.4
Measurement parameters
6.4.1
Measurement parameters tab
The Measurement parameters contains the data related to the watch you want to measure
(frequency, lift angle,...) but also the way you want to measure it (how much integration time,
stabilization time,...). A measurement cannot be made without parameters. The default
parameters are the parameters assigned to a connection with a device. If no default parameter
is assigned, the built-in parameter is used by default.
The Measurement parameters is organized as follows:
FIG. 6-12 - Accuracy Motion (Measurement parameters organisation)
(1)
Parameter control bar
(2)
Set as default and save menu
(3)
Parameters editing
(4)
Parameters list area
Using the application
23|36