Table of Contents
Advertisement
1.5
Typographical conventions
The styles used in this manual are the following:
Designation
Ordered list
Software
commands
Procedure
Cross-
reference
Attention
Note
Link to glossary
Definition
Used in conjunction with the
illustration numbers, preceded by
the corresponding numbers.
All software commands, buttons,
function keys, windows and the like
used in the manual is indicated in
bold and italics.
Each step of the procedure to be
followed by the user is preceded by
a letter.
Link to further information.
Used to refer to a potentially
hazardous situation that, if not
avoided, may result in minor injury or
property damage.
Used to accompany a general
remark or a purely informative
comment.
Used to link a word to its definition in
the Glossary section.
Introduction
Example
(1)
First element
(2)
Second element
(3)
Etc...
The On button (Switching on) allows
to switch the group on.
A.
Remove the cover plate.
B.
Replace the defective
element.
C.
Put the sheet back on.
[See Typographical
conventions, page 4]
ATTENTION
The unit should be
transported upright and
should not be subject to
shock.
The unit has been checked,
adjusted and tested in our
workshops.
Lift angle.
4|36
Advertisement
Table of Contents
