Table of Contents
Advertisement
6.4.3
Criteria tab
6.4.3.1
Define Criteria
The Criteria define the display of the measurement data. The criteria will change the
information displayed in the Device Overview window.
FIG. 6-20 - Accuracy Motion (Criteria for displaying the measures)
(1)
Create criteria button
(2)
Save button
(3)
Displayed Positions
In the example above, only the DU, CD, CU and OTHER positions selected in Displayed
positions (3) will be displayed in the Device Overview window (4) for the Accuracy tab.
The different fields to define the criteria are:
•
Name: Define a criteria name
•
Displayed positions: The positions selected in this section (3) will be displayed in the Device
Overview window (4).
•
Accuracy: allows you to define the upper and lower limits of your display in seconds/day. In the
Summary table of the Device overview window (4), a value outside the limits will be displayed
on a red background and on a black background when the value is within the defined limits.
This is very useful if you want to check your measurement quickly.
•
Amplitude: can be set in the same way as the Accuracy.
•
Beat error: The Beat Error is always positive, you can only set the upper limit.
6.4.3.2
Save Criteria
A.
Save the criteria by clicking the Save button (2).
(4)
Device overview window
(5)
Displayed measurement positions
Using the application
29|36
Advertisement
Table of Contents
