H2I ONEOF Accuracy Motion User Manual page 26

• Lift angle: manufacturer's data.
• Escapement: manufacturer's data.
• Frequency: number of oscillations of the balance
wheel. The frequency can be set to automatic by
checking the Auto box.
• Gain: can also be found automatically by checking the
Auto box.
• Integration time: value between 2 and 240 seconds.
• Stabilization time: to be used when the device stays
within the same position type.
• Stabilization time horizontal and vertical: to be used
when the device changes from vertical to horizontal
position or vice versa.
There are two types of position: The horizontal
positions that includes DU and DD and the vertical
ones that includes CR, CU, CD and CL.
6.4.1.2 Launch measurement parameters
A. Either define the parameters to be default parameters.
[See Creation of parameters, page 24]
B. Or choose them from Accurracy, in the Device measurement parameters" window.
[See Accuracy Tab, page 14]
FIG. 6-14 - Accuracy Motion (Creation
Using the application
of parameters 2)
25|36