Diagram view
FIG. 6-7 - Accuracy Motion (Diagram view)
(1)
Diagram view
(2)
Previous view button
As soon as the frequency is detected, the diagram starts to display the results. Each point
represents a tick or a tock in time, which is shown as two lines.
•
If the watch tends to run faster, the slopes are positive.
•
If the watch tends to slow down, the slopes are negative.
•
If the watch is perfectly accurate, the graph displays flat lines.
If the watch has no beat error, the two lines are superimposed. If the beat error is greater than
0.0 ms, the lines are spaced. The greater the beat error, the greater the space between the
lines.
(3)
Next view button
(4)
Diagram view button
Using the application
19|36