Safety And Environment; Environmental Conditions; Safety And Precautions For Use - H2I ONEOF Accuracy Motion User Manual

Table of Contents

Advertisement

2.

Safety and environment

This chapter defines the safety instructions for the proper operation of the Accuracy Motion
device and the associated software. It also describes the handling and storage conditions.
2.1

Environmental conditions

The Accuracy Motion device must be used exclusively indoors.
The electrical safety of the device is guaranteed only if the electrical installation of the
building complies with the regulations for industrial buildings, and if it functioning
properly.
The device should not be exposed to heat, dust or excessive moisture.
The device should not be close to a powerful sound source as this may distort the
results.
Operating values
Designation
Max. ambient humidity
Ambient work place temperature
Relative temperature range
2.2

Safety and precautions for use

2.2.1
Importance of safety instructions
The safety and protection instructions in this manual must be followed to avoid injury,
property damage or environmental pollution.
In the same way, the legal provisions, accident prevention and environmental protection
measures, as well as the technical regulations to ensure safe and suitable working conditions
applicable in the country and at the location where the device is used must be observed.
Use of the device in any manner other than that described in this manual may void the
warranty.
2.2.2
General safety instructions and signs
Repair and maintenance work should only be carried out by a qualified service
technician designated by the manufacturer.
Heed all warnings and follow all instructions provided on the device and in the the device
and in the documentation.
The device should only be connected to the indicated power sources.
Never use components other than those supplied by the manufacturer.
The device must be installed on a flat, dry and stable surface.
Never force or stop the motor movements by hand.
The device must be used with the supplied software and accessories approved by the
manufacturer.
Value
79
5-35
-15 +15
Safety and environment
Unit
%
°C
°C
5|36

Advertisement

Table of Contents
loading

Table of Contents