Editing Without Pg-200 - Roland GR-700 Owner's Manual

4.EDIT MODE
Like any usual synthesizer, the GR-700 has various
parameters (32 kinds) which can be edited for
sound synthesis. The GR-700, however, does not
feature knobs or switches on its panel for you to
touch or move. Instead, there are two methods of
synthesizing. One is using the optional programmer
PG-200 which works just like panel controls of a
usual synthesizer. Another is calling each parameter
by using the Pedal Switches and changing its value
a. Editing without PG-200
The GR-700 has 32 different parameters, and each
parameter has a number of 11 to 48. Call the para-
meter you wish to edit by assigning its number.
Then change the value of the parameter by using the
Edit (Resonance) Knob.
= EDIT MAP
EDIT MAP .
er
by using the controls on the Guitar Controller. For
quicker and easier editing or synthesis from scratch,
the PG-200 may be essential.
* This Editing function does not automatically
rewrite the existing program, unless the appro-
priate procedure for rewriting (See page 24.) is
done.
* See the Edit Map to find out the number of the
parameter. The Edit Map is identical to the
PG-200's control panel.
GR-700
Source Mix
0808
Wavetarm Fine Tune
q Uma
Deo-2
Cutoff Freq Resonance
Se O
N Mog
Man SFO
LFO Mod ENV Mod Bend Rarge
33 Ge 27-E3 62) G) [11]
Pitch Follow Tuning
|
® Q-E| G-E:
LFO
Wavaform Delay Time Rate
N MU Random
a e e e.
14
Envetope
Decay Sustsin Release