Getting Ready To Play; Ä Placing The Juno-X On A Stand; Ä Turning The Power On And Adjusting The Volume; Turning The Power Off - Roland JUNO-X Reference Manual

Getting Ready to Play

Placing the JUNO-X on a Stand
If you want to place the JUNO-X on a stand, use the Roland KS-10Z or KS-12. Place the JUNO-X on the stand as follows.
Be sure to follow the instructions in the Owner's Manual carefully when placing this unit on a stand. If it is not set up properly, you risk creating an
unstable situation which could lead to the unit falling or the stand toppling, and may result in injury.
* Be careful not to pinch your fingers when setting up the stand.
KS-10Z
Adjust the horizontal width of the
stand as shown in the illustration.
KS-12
Turning the Power on and Adjusting the
Volume
1 .
Turn the volume of the JUNO-X all the way down .
If you've connected external speakers or similar audio
equipment to this instrument, turn the volume of those
external devices all the way down as well.
2 .
Power-on the equipment in the order of JUNO-XÓ
connected devices .
* In order to protect its circuitry, the JUNO-X waits for a while after being
powered on before it begins operating.
3 .
Raise the volume of the connected equipment to an
appropriate level .
4 .
Adjust the volume of the JUNO-X with the [VOLUME]
knob .

Turning the Power off

1 .
Turn the volume of the JUNO-X all the way down .
If you've connected external speakers or similar audio
equipment to this instrument, turn the volume of those
external devices all the way down as well.
2 .
Turn off the equipment in this order: connected
devices Ó JUNO-X .
* If you need to turn off the power completely, first turn off the unit, then
unplug the power cord from the power outlet. Refer to "To completely
turn off power to the unit, pull out the plug from the outlet" in the "Quick
Start."
790 mm (2' 7" inches)
Top view
Adjust so that the height
does not exceed 1 meter.
Adjust the width of the stand so
that the two rubber feet located on
the player's side fit into the holes
provided on the stand.
(Player's side)
Top view
Setting the AUTO OFF function
The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto Off
function). If you do not want the power to be turned off automatically,
disengage the Auto Off function.
* Unsaved settings are lost when you turn the power off. Before turning the
power off, save (WRITE) the data that you want to keep (p. 44).
* To restore power, turn the power on again.
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [ÇSELECTÉ] knob to select "SYSTEM," and
then press the [ENTER] (INIT) button .
3 .
Use the [ÇSELECTÉ] knob to select "Auto Off" and
use the [- VALUE +] knob to change the setting .
If you don't want the unit to turn off automatically, choose the
"OFF" setting.
Parameter Value
[ Ç SELECT É ] knob
[- VALUE +] knob
Auto Off OFF, 30 (min), 240 (min)
4 .
To save the edited settings, hold down the [SHIFT]
button and press the [MENU] (WRITE) button .
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
5 .
To execute, press the [ENTER] (INIT) button .
Align the side facing the player
of the JUNO-X with the front of
the stand
11