Ä Using The Built-In Speakers - Roland JUNO-X Reference Manual

Getting Ready to Play
Using the Built-In Speakers
This unit contains built-in stereo speakers. If the built-in speakers are
turned on, you can play sound from this unit.
Speaker locations
1 .
Press the [MENU] (WRITE) button .
2 .
Use the [ÇSELECTÉ] knob to select "SYSTEM," and
then press the [ENTER] (INIT) button .
3 .
Use the [ÇSELECTÉ] knob to select "Speaker Sw," and
use the [- VALUE +] knob to specify "ON" or "AUTO . "
Parameter Value
[ Ç SELECT É ] knob
[- VALUE +] knob
OFF
ON
Speaker Sw
AUTO
4 .
To save the settings, hold down the [SHIFT] button
and press the [MENU] (WRITE) button .
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
5 .
To execute, press the [ENTER] (INIT) button .
12
Explanation
Sound is not output from the speakers.
Sound is output from the speakers.
When headphones are connected, the
sound is output through the headphones;
and when headphones are not
connected, the sound is output through
the speakers.