Table of Contents
Advertisement
ANAFI Ai
Maintenance and Troubleshooting
This section describes basics procedures which enable you to maintain your drone and troubleshoot
most issues you can encounter using ANAFI Ai.
In addition, drone and controller resetting procedures can prove useful before a change of operator or
operating structure, for example.
Changing propeller blades
Propeller blades are instrumental for flight integrity and delicate pieces of equipment. Even minor
contacts with external elements (wall, tree branch, etc.) can invisibly damage their structure. Remember
that for safety ANAFI Ai is programmed to cut its motors instantly in case of impact on one of its
propeller blades: always control your drone carefully.
Therefore, Parrot recommends you immediately replace propeller blades which have sustained even a
minor contact with the environment– or to replace them every 50 flight hours, as part of scheduled
maintenance.
ANAFI Ai propeller blades have been designed for instant, no tool replacement. To replace a propeller
blade, follow this simple procedure.
1. Unfold the arm that supports the blades which need to be replaced.
2. Hold the motor (round rotating part) of the propeller between your left thumb and index.
3. Unfold the blades and pinch the part which screws on the motor, between the blades, with your
right thumb and index.
A. blades: unscrew used A blades (left
front & right back) counterclockwise and
screw new ones clockwise.
Double check your blades respect the following diagram before setting up ANAFI Ai for its next flight.
118
B. blades: unscrew used B blades (left
back & right front) clockwise and screw
new ones counterclockwise.
Advertisement
Table of Contents
