Troubleshooting; Rebooting All Systems; Reinstalling Freeflight 7; Resetting Anafi Ai - Parrot ANAFI Ai User Manual

T
ROUBLESHOOTING
This section describes procedures which enable you to troubleshoot most issues you can
encounter using ANAFI Ai.
In addition, drone and controller resetting procedures can prove useful before a change of
operator or operating structure, for example.

Rebooting all systems

The first intent procedure, when the ecosystem does not perform as expected, is to power off
and reboot all elements of the ecosystem:
o device (kill FreeFlight 7 and reboot);
o Skycontroller 4;
o ANAFI Ai.

Reinstalling FreeFlight 7

If you feel you must delete and reinstall FreeFlight 7 (for example if you suspect a conflict with
a recent iOS update), remember to back up all your device FreeFlight 7 media, as they will be
deleted with the application.
Resetting
ANAFI Ai
Resetting ANAFI Ai reverts the drone back to its latest firmware update: it cleans all media,
logs and credentials from the drone. For this reason, remember to back up all your "Drone
memory" FreeFlight 7 media before resetting ANAFI Ai.
To reset ANAFI Ai, press and hold the drone's power button for approximately 10 seconds,
until one of the LED flashes in red, then release the button immediately.
The drone reboots. The reset is successful.
The same procedure can be carried out through the "Reset" button of ANAFI Ai's page, in
FreeFlight 7.
FreeFlight 7: Position of the reset button on the ANAFI Ai page
83