Flushmount fixture accessory for pat 4.0 (11 pages)
Summary of Contents for Panduit Atlona AT-HDVS-CAM-CMNT
Page 1
PTZ Ceiling Mount Kit AT-HDVS-CAM-CMNT The Atlona AT-HDVS-CAM-CMNT is a ceiling mount kit for the AT-HDVS-CAM, AT-HDVS- CAM-HDMI, and AT-HDVS-CAM-HDBT PTZ cameras. It includes all necessary hardware to enable a secure, flush installation onto a ceiling surface. This accessory is ideal for classrooms...
Page 2
Installation Guide AT-HDVS-CAM-CMNT Installation Position part A at the desired position on the ceiling / surface. Attach part A to the ceiling / surface by positioning screws (not provided) through the arc-shaped holes (1), as required. Attach part B to the bottom of the AT-HDVS-CAM using the included 1/4” 20UNC screw. Attach part A to part B, as shown below.
Page 3
Installation Guide AT-HDVS-CAM-CMNT Installation - Legacy Mounts To install the AT-HDVS-CAM, AT-HDVS-CAM-HDMI, or AT-HDVS-CAM-HDBT onto a ceiling, the following is needed: 4 PA3X30 self-tapping screws, 4 PM3X6 screws, 4 screw stoppers, 1 1/4 20UNC screw, AT-HDVS-CAM-CMNT, and the AT-HDVS-CAM/-HDMI/-HDBT. Install the 4 screw stoppers in the ceiling. Connect the upper ceiling covering plate to the screw stoppers using the PA3X30 self- tapping screws.