Functionality Test - Tele Radio T21-03 User Instructions

6.5 F u n c t io n al it y t es t
NOTE: This list is intended for use as a support for the manufacturer of the
equipment where Tele Radio AB remote control systems are installed.
Before operating the radio system, follow the procedure below.
IMPORTANT! This test should be performed at each shift, without a load, and
should include but not be limited to the following steps
Make sure that the controlled object can not cause any harm in the event of
l
unexpected movement.
Always follow local safety rules and start the equipment according to the
l
corresponding instructions.
Make sure that the transmitter can control the receiver by testing all
l
functions.
Make sure that the functions respond as expected.
l
Make sure that all movements are as planned.
l
Make sure the system stops when the batteries are removed from the
l
transmitter.
18 ED-PN-TX105-EN-v02