Charging - Keenon Robotics PEANUT Product Manual

the elevator to go to the destination floor.
④ After the robot reaches the destination point, the user will be notified to
fetch the goods according to the set notification method.
⑤ The robot will return to the charging point/fixed docking point after the
user fetches the goods and clicks 'Close the Door' button. If the user
forgets to click 'Close the Door' button, the robot has a timeout door
closing mechanism.

Charging

1. Autonomous Intelligent Recharging
The robot has intelligent autonomous recharging function. When the
following two conditions are met, the robot will return to the charging pile
position for charging autonomously. Please ensure that the charging pile
position is fixed and electrified.
 The capacity is lower than the recharging capacity value set by the user.
 The robot is out of working time, and the capacity is not up to 100%.
For setting of the triggering conditions of autonomous recharging, please
refer to "Charging Setting" in Settings section of this Manual.
2. Manually-Triggered Charging by User
Users can trigger and control the robot to recharge automatically on the
setting page through the PEANUT APP. For specific operation steps, see
Settings section of this Manual.
* Note:
The two methods above charge robot with charging pile, so it must ensure that the
17 17 17 17 17 17 17