Power Supply Unit (Psu) - HP ProLiant SL160z G6 Maintenance And Service Manual

Figure 39 Installing the tray with system board into the chassis

Power Supply Unit (PSU)

Located on the rear panel of the server power supply is a standard auto ranging 750watt PSU with
PFC (power factor correction) function.
Figure 40 Power supply unit
WARNING: Take note of the following reminders to reduce the risk of personal injury from electric
shock hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.
•
DO NOT open the power supply unit. There are no serviceable parts inside it.
To install the power supply:
Remove the power supply blank out of the power cage.
1.
Align the power supply cage connector with the open slot of power supply.
2.
All manuals and user guides at all-guides.com
Removal and Replacement Procedures 52