ADA INSTRUMENTS ProDigit 30 Operating Manual page 13

ProDigit 30
Pitch (Fig.7)
The digital level can be used to measure the pitch of a roof. It measures the pitch in
inches of rise per foot of run. Push the conversion button to change angle to pitch. The
if the pitch is above or below the desired measurement.
Fig.7
Angle (Fig.8)
The digital level measures any angle in degrees with up to 0.1° accuracy, at level or
angle for many surfaces, and when the conversion button is pushed to display angle,
will tell you the angle and which way it is off of true level. If the beeper button is turned
on, the level will beep at 0.00° angle.
Fig.8
Slope (Fig.9)
The digital level measures the slope of a surface in percent. This is useful when lay-
ing pipe for proper drainage. When the conversion button is in the slope mode, it will
13
MEASUREMENT FOUNDATION