1MRK 505 400-UEN B
Section 2
Distributed busbar protection REB500
Technical manual
Safety information
Dangerous voltages can occur on the connectors, even though the auxiliary
voltage has been disconnected.
Non-observance can result in death, personal injury or substantial property
damage.
Only a competent electrician is allowed to carry out the electrical installation.
National and local electrical safety regulations must always be followed.
The frame of the IEDs has to be carefully earthed.
Whenever changes are made in the IEDs, measures should be taken to avoid
inadvertent tripping.
The IEDs contain components which are sensitive to electrostatic discharge.
Unnecessary touching of electronic components must therefore be avoided.
© Copyright 2019 ABB. All rights reserved
Section 2
Safety information
GUID-7CDA9FB7-5CD6-4BD5-A1D2-AAB8E7BF87A3 v2
5