Additional Settings; Time Zone Correction; Daylight Saving Time - ABB RELION REB500 Operation Manual
Distributed busbar protection
Hide thumbs
Also See for RELION REB500:
- Technical manual (194 pages) ,
- Operation manual (110 pages) ,
- Applications manual (108 pages)
Table of Contents
Advertisement
Section 4
System settings
Table 31:
Setting
SNTP1
SNTP2
4.7.4
Additional settings
This section provides additional options for system-time parameters.
4.7.4.1
Time zone correction
This menu allows the adjustment of the deviation between local time (of installed REB500
system) and UTC (Universal Time coordinated).
IEC18000461 V1 EN-US
Figure 6:
4.7.4.2
Daylight saving time
The Daylight saving time (DST) menu permits the configuration of an automatic switching
between standard and summer time.
If the DST enabled check box is selected, the user can define the moment of Start and End of
the DST period. The DST settings are saved by clicking OK or Apply.
36
Configuration parameters for synchronizing via SNTP
Description
TCP/IP Address of the SNTP time master
TCP/IP Address of the SNTP standby time master
Settings/Time/Time zone correction
© Copyright 2019 ABB. All rights reserved
13000022-IEC18000461-1-en.vsdx
Distributed busbar protection REB500
1MRK 505 400-UEN B
Default setting
127.0.0.1
127.0.0.1
GUID-4B8A2581-DB39-4B62-AE0D-EE1572A8330C v1
GUID-B8ECEB52-F5B2-4E5D-A03D-D452593A8CE4 v1
GUID-C04276F3-09E4-493C-9047-C2F4D20E6878 v1
Technical manual
Advertisement
Table of Contents
