System Screen - Panasonic AW-UE50WP Operating Instructions Manual

Camera menu items (continued)
O.I.S. Mode [Off, O.I.S.]
Sets the mode for optical image stabilization (O.I.S.).
Off Turns the optical image stabilization (O.I.S.) function Off.
O.I.S. Turns the optical image stabilization (O.I.S.) function On.
<NOTE>
• In [O.I.S.] mode, the optical image stabilization (O.I.S.) function's
level of correction is reduced during pan/tilt operations in order to
minimize the convergence resulting from image stabilization during
pan/tilt operations.
Return
Return to the previous menu level.

System screen

S y s t e m
F r e q u e n c y
F o r m a t
W i r e l e s s C o n t r o l
W i r e l e s s I D
U S B
U S B M o d e
U S B A u t o A c t i v e
U S B A u t o S t a n d b y
R e t u r n
Frequency [59.94Hz, 50Hz, 24Hz, 23.98Hz]
This item is selected to switch the frame frequency.
• For details on how to change the frequency, refer to "Changing the
frequency" (→ page 55).
Format
For [59.94Hz]
2160/29.97p, 1080/59.94p, 1080/59.94i, 1080/29.97p,
1080/29.97PsF 1 , 1080/23.98p(59.94i)
*
For [50Hz]
2160/25p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF
For [24Hz]
2160/24p, 1080/24p
For [23.98Hz]
2160/23.98p, 1080/23.98p, 1080/23.98PsF
* 1
AW-UE50 only
*
2
It denotes "1080/23.98p over 59.94i".
<NOTE>
• Streaming stops when changing the system format.
• For details on how to change the format, refer to "Changing the
format" (→ page 56).
Wireless Control [Enable, Disable]
[Enable] or [Disable] is set here for operations conducted from the
wireless remote control.
<NOTE>
• When the power is turned on with the wireless remote control, then
operations from the wireless remote control are possible irrespective
of this setting value.
• This item is not reflected immediately when the setting is changed.
It is reflected when the unit is set to Standby mode, and then the
power is turned ON with any external device other than the wireless
remote control.
• This setting is not reflected when the power is turned ON with this
item set to [Enable]. It is reflected when the unit is set to Standby
mode, and then the power is turned ON with any external device
other than the wireless remote control.
Wireless ID [CAM1, CAM2, CAM3, CAM4]
Set the remote control ID for this unit.
The settings for this item correspond to the CAMERA <1> to <4>
buttons on the wireless remote control.
54
5 9 . 9 4 H z
1 0 8 0 / 5 9 . 9 4 p
E n a b l e
C A M 1
O f f
O n
O f f
1, 2 , 720/59.94p
*
1 , 720/50p
*
1
*