Panasonic AW-UE50WP Operating Instructions Manual page 104

Web screen configurations (continued)
Matrix Type [Normal, Professional, User]
Select the type of color matrix.
The setting is confirmed with the [Set] button.
Normal Standard preset matrix setting.
Professional Preset matrix setting equivalent to Panasonic
broadcasting devices.
User On the [Matrix 2/5] screen, the [Linear Matrix] value can
be adjusted by the user.
On the [Matrix 3/5] screen, [Matrix 4/5] screen or [Matrix
5/5] screen, the [Color Correction] value can be adjusted
by the user.
Factory settings: Normal
Adaptive Matrix [Off, On]
Set Off/On the function that suppresses the linear matrix to suit the
shooting conditions.
Factory settings: Off
Matrix Settings
Linear Matrix
This can be set when [User] has been selected as the [Matrix Type]
setting.
R-G
R-B
G-R
Adjust the color to between –63 and +63 for each axis
direction.
G-B
B-R
B-G
Factory settings: (→ page 69)
Color Correction
This can be set when [User] has been selected as the [Matrix Type]
setting.
Adjust the saturation and hue for each color.
Saturation [–63 to +63]
Adjust the saturation for each color.
Phase [–63 to +63]
Adjust the hue for each color.
B_Mg Color between blue and magenta
Mg Magenta
Mg_R Color between magenta and red
Mg_R_R Color with a 1:3 magenta to red ratio
R Red
R_R_YI Color with a 3:1 red to yellow ratio
R_Yl Color between red and yellow
R_Yl_Yl Color with a 1:3 red to yellow ratio
Yl Yellow
Yl_Yl_G Color with a 3:1 yellow to green ratio
Yl_G Color between yellow and green
G Green
G_Cy Color between green and cyan
Cy Cyan
Cy_B Color between cyan and blue
B Blue
Factory settings: (→ page 69)
Lens setting screen [Lens]
„ „
The setting is confirmed with the [Set] button.
Focus Mode [Manual, Auto]
Select auto or manual mode for the focus adjustment function.
Manual Adjust focus manually.
Auto Always adjust focus automatically.
Factory settings: Auto
AF Sensitivity [Normal, Stable]
Select the conformability mode for auto focusing function.
Normal Focusing is with a standard conformability.
Stable Focusing is with a priority placed on stability.
Factory settings: Normal
Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]
Set the maximum magnification rate for zoom.
Opt.Zoom Use only optical zoom.
Optical zoom up to 24× is possible.
i.Zoom Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
When [Format] in the [System] screen is 2160/29.97p,
2160/25p, 2160/24p, 2160/23.98p
Up to 28× zoom is possible combining optical zoom and
digital zoom.
• When [Format] in the [System] screen is other than one
of these, up to 36× zoom is possible combining optical
zoom and digital zoom.
D.Zoom Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
Factory settings: Opt.Zoom
Max Digital Zoom
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [Zoom Mode] is set to [D.Zoom].
Factory settings: ×10
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
104