Panasonic AW-UE50WP Operating Instructions Manual page 109

Web screen configurations (continued)
z Add user
„
User name [1 to 32 characters]
The user name is input here.
The setting is confirmed with the [Set] button.
• The following characters can be displayed.
Numeric characters
Alphabetical characters (upper
and lower cases)
Symbols
Password
Retype password [4 to 32 characters]
The password is input here.
The setting is confirmed with the [Set] button.
Access level [1.Administrator, 2.Camera control]
Select the user access level.
The setting is confirmed with the [Set] button.
This access level allows the user to perform all
1.Administrator
the unit's operations.
This access level allows only live screen [Live]
2.Camera control
operations to be performed.
Factory settings: 1.Administrator
z Delete user
„
Delete the user accounts registered in the unit.
You can delete selected users by clicking the [Delete] button at the right.
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
! $ % ´ ( ) + , - . / = ? @ [ ] ^ _ ` { } ˜
*
Host authentication screen [Host auth.]
„ „
Click the [Host auth.] of User management screen [User mng.].
Configure the host authentication settings that restrict the personal
computers (IP addresses) that can access the unit.
z Setting status
„
Host auth.
The host authentication settings are displayed.
Host IP address
The host IP address is displayed.
Access level
The host access level is displayed.
z Mode
„
Host auth. [Off, On]
Host authentication is set to [On] or [Off] here.
The setting is confirmed with the [Set] button.
Factory settings: Off
109