Panasonic AW-UE50WP Operating Instructions Manual page 114

Web screen configurations (continued)
Advanced network setting screen [Advanced]
„ „
Click the [Advanced] in the network setup screen [Network].
Settings relating to the NTP, UPnP and HTTPS functions are performed
here.
Click the links to each item to move to the respective setting page.
z Setting status
„
HTTP Port number
Displays the port number configured via UPnP port forwarding.
HTTP Status
Displays the port forwarding status.
HTTPS Port number
Displays the port number configured via UPnP port forwarding.
HTTPS Status
Displays the port forwarding status.
Router global address
Displays the global address of the router.
z NTP
„
Settings relating to the NTP server address and port No. are performed
here.
The setting is confirmed with the [Set] button.
Synchronization with NTP [On, Off]
On The time adjusted automatically through synchronization
with the NTP server will be used as this unit's standard time.
Off The time set in [Date/time] of the Basic screen [Basic] will
be used as this unit's standard time.
Factory settings: Off
NTP server address setting [Auto, Manual]
Select the method to acquire the NTP server address.
Auto Acquires the NTP server address from the DHCP server.
Manual Sets the address by inputting the NTP server address in
[NTP server address].
Factory settings: Manual
<NOTE>
• To acquire the NTP server address from the DHCP server, [DHCP]
or [DHCPv6] must be set to [On] in the [Network] of the network
setup screen [Network]. (→ page 111)
NTP server address
When [Manual] is selected in the [NTP server address setting], input
the IP address or host name of the NTP server.
Maximum number
1 to 128 characters
of characters
Characters that
Alphanumeric characters, symbols : . _ -
can be entered
Factory settings: blank
<NOTE>
• To input the [NTP server address] host name, the [DNS] setting
must be selected on the [Network] of the network setup screen
[Network]. (→ page 110)
• This does not work when link local address is set in [NTP server
address].
NTP port [1 to 65535]
Input the port No. of the NTP server.
The following port numbers are used by the unit so they cannot be
used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 546,
547, 554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900,
59000 to 61000
Factory settings: 123
Time adjustment interval [1h to 24h]
Selects the interval (1 to 24 hours in 1-hour increments) for acquiring
the time from the NTP server.
Factory settings: 1h
114