Panasonic AW-UE50WP Operating Instructions Manual page 107

Web screen configurations (continued)
z Preset Setting
„
Preset Speed Unit [Speed Table, Time]
When reproducing the information such as camera direction
registered in the preset memory, you can select whether to specify
the playback time by speed or by time.
Speed Table Specify the speed when playing during preset
playback.
Time Specify the time when playing during preset playback.
Factory settings: Speed Table
Preset Speed Table [Slow, Fast]
Set the preset speed table (Slow, Fast). During preset playback,
presets are performed at [Preset Speed] (1 to 30) values that are
based on the table set here.
This is only enabled when [Preset Speed Unit] is set to [Speed Table].
Factory settings: Fast
Preset Speed [1 to 30/1s to 99s]
When [Preset Speed Unit] is [Speed Table]: [1 to 30]
Set the pan/tilt operation speed in 30 steps when playing back the
preset memory.
Factory settings: 20
<NOTE>
• When you set large [Preset Speed] values, the image may sway
when the movement stops.
When [Preset Speed Unit] is [Time]: [1s to 99s]
Set the pan/tilt operation time between 1 and 99 seconds when
playing back the preset memory.
Factory settings: 20s
<NOTE>
• Depending on the movement distance of pan/tilt, there may be a
difference compared to the specified time.
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
Mode A
white balance adjustment value
Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
Factory settings: Mode A
Preset Digital Extender [Off, On]
Turns the preset digital extender function off/on.
When set to [On], the digital extender function configuration will be
recalled when regenerating the preset memory.
When set to [Off], the digital extender function configuration will not
be recalled when storing the preset memory.
Factory settings: Off
Preset Thumbnail Update [Off, On]
Turn off/on the function for registering the still image (thumbnail) for
the images being output when a preset memory is registered.
When set to [On], the still image (thumbnail) for the images being
output is registered when registering a preset memory.
When set to [Off], the still image (thumbnail) for the images being
output is not registered when registering a preset memory, but rather
the still image (thumbnail) previously registered is maintained.
Factory settings: On
<NOTE>
• When [IP/HDI|HX] in [OSD Mix] is [On], the character strings
in the OSD menus displayed when generating the still images
(thumbnails) are imported into the thumbnails.
• When uploading Camera(ALL), Camera(SYSTEM) or
Camera(PRESET) on the web screen or other access, the still
image (thumbnail) that has been registered in preset memory will be
erased. (→ page 130)
Preset Name [Reset, Hold]
When registering a preset memory, set whether to reset the
previously registered preset name or keep it.
Reset When registering a preset memory, reset the
previously registered preset name.
The preset name after resetting will be [Preset
( is a 3 digit preset number: 001 to 100)
***
Hold When registering a preset memory, keep the
previously registered preset name.
Factory settings: Reset
<NOTE>
• The factory default setting for the preset name is [Preset
a 3 digit preset number: 001 to 100)
• The registration of preset names can be done in the web browser.
0 to 9, A to Z, a to z, _ , and space
Preset Iris [Off, On]
When the preset memory is played back, set whether the
reproduction of the values in the various menus related to Iris is off/
on.
When set to [On], the values set in the various menus below are
reproduced when preset memory is played back.
- Picture Level
- Iris Mode
- Auto Iris Speed
- Auto Iris Window
Factory settings: Off
<NOTE>
• Its setting takes effect when [Mode A] or [Mode B] has been
selected as the [Preset Scope] setting.
Preset Shutter [Off, On]
When the preset memory is played back, set whether the
reproduction of the Shutter setting value is Off/On.
Factory settings: On
<NOTE>
• This is enabled when [Preset Scope] is [Mode A].
• The Shutter values are reproduced only when the frame rate when
the preset memory was registered and the frame rate when playing
back the preset memory match.
107
].
***
]. ( is
*** ***