Intended Use - Viega 1078 Instructions For Use Manual

Instructions for use
Heating circuit manifolds / Distributors
Stainless steel
Models 1078 / 1006 / 1004

Intended use

Heating circuit manifolds and distributors are suitable for connecting heating circuits in
heating systems that comply with EN 12828.
Heating circuit manifolds are for balancing heating water quantities in floor heating
circuits, distributors are used to connect radiators.
Heating circuit manifolds and distributors may only be installed and used in conjunction with
original accessories and using suitable tools. Assembly and maintenance work may only be
performed by trained professionals on an non-pressurised system. Local building regulations
and the instructions for use included with the tools and accessories must be observed.
518846_Verteiler_Edelst.indd 21
Item Distributor
Model
No. manifolds
586225 2
586232 3
586249 4
587550 5
587567 6
1078
587574 7
587581 8
587598 9
587604 10
587611 11
587628 12
587741 2
587758 3
587765 4
587772 5
587789 6
1006 587796 7
587802 8
587819 9
587826 10
587833 11
587840 12
599560 2
599577 3
599584 4
599591 5
599601 6
1004 599614 7
599621 8
599638 9
599645 10
599652 11
599669 12
21
Product description / Scope of delivery
Distributor
for connecting radiators,
stainless steel, threaded gland clearance 50 mm,
with manual vent, wall holder with sound
insulation, boiler side: 1" cap nut, flat sealing,
heating circuit side: ¾" Eurokonus
Heating circuit manifold
For floor heating systems, as described above,
with additional fill and drain valve, return pipe
with integrated valve inserts and manual
regulating heads, connection suitable for
Fonterra servo drives, supply pipe with
regulating inserts
Heating circuit manifold
For floor heating systems, as described above,
with added thermometer and supply pipe with
adjustable flow volume gauge.
GB
www.viega.com
09.11.11 15:10