System Message - Bosch BULLS ICONIC EVO TR 1 750 Operating Instructions Manual

1. Selected level of assistance indicator
The higher the selected level of assistance, the
more the drive system assists with pedalling.
eMTB mode is available for Performance Line CX
drives. In eMTB mode, the assistance factor and
the torque are dynamically adjusted depending on
the pedalling force applied to the pedals.
Level of assistance Colour Use
O FF No
ECO Green
TO U R blue
e Purple
M TB /SP O RT
TU RB O Red
Table 13: Overview of levels of assistance
2. ABS indicator (optional)
The ABS indicator lights up on ebikes with an
ABS system when they start up.
The ABS will switch off if the ebike reaches a
speed of 4 mph.
If there is a fault, the ABS indicator lights up
together with the indicator of the selected level of
assistance, which will flash orange.
Press the Select button to acknowledge the fault
and the flashing indicator for the selected level of
assistance will go out. The ABS indicator remains
lit to indicate that the ABS system is not in
operation.
When the drive system is
switched on, the motor
assistance is switched off. The
ebike can be used like a
normal bicycle by simply
pedalling.
Limited assistance with
maximum efficiency for
maximum range
Constant assistance, for long-
range tours
Powerful assistance, for sporty
start-up, optimal assistance on
all types of terrain
Maximum assistance up to
high pedalling frequencies, for
sport riding
3. Battery level indicator (control panel)
The battery level indicator (control panel) shows
the battery charge level. You can also see the
battery charge level on the LEDs on the battery
itself.
Each blue bar on the indicator signals 20%
capacity and each white bar 10% capacity. The
top bar indicates maximum capacity. The two
lower indicators will change colour if the capacity
is low:
Bars
5 × blue
4 × blue + 1× white
4 × blue
3 × blue + 1× white
3 × blue
2 × blue + 1× white
2 × blue
2 × orange
1 × orange
1 × red
1 x red, flashing
Table 14: Battery level indicator (control panel)
The uppermost bar will flash if the battery is
charging.

3.4.2.1 System message

The control panel indicates whether a critical or
less critical error has arisen in the drive system.
The error messages generated by the drive
system can be read in the eBike Flow app and by
the specialist dealer.
The rider can use a link in the eBike Flow app to
display all information on errors and assistance on
eliminating errors.
You will find more information and a table
containing all system messages in Section 6.2.
Description
Capacity
100...91%
90...81%
80...71%
70...61%
60...51%
50...41%
40...31%
30...21%
20...11%
10%...reserve
Reserve...empty
47