Using Ebike With The Electric Drive System; Switching On The Electric Drive System; Switching Off The Electric Drive System - Bosch BULLS ICONIC EVO TR 1 750 Operating Instructions Manual

Using ebike with the electric drive system

6.17
6.17.1 Switching on the electric drive
system
CAUTION
!
Crash caused by lack of readiness for braking
When it is switched on, the drive system can be
activated by the application of force on the
pedals. There is a risk of a crash if the drive is
activated unintentionally and the brake is not
reached.
 Never start the electric drive system, or switch
it off immediately, if the brake cannot be
reached safely and reliably.

A sufficiently charged battery has been inserted
into the ebike.

The battery is firmly positioned and locked. The
battery key has been removed.

The speed sensor is connected correctly.
There are two options for switching on the drive
system.
On-Off button (control panel)
 Press the On-Off button (control panel) briefly
(< 3 seconds).
1
Figure 120: Position of the On-Off button on the BOSCH
LED remote
On-Off button (battery)
 Press the On-Off button (battery) briefly.
 All LEDs on the control panel will light up
briefly.
The battery level is displayed in color by the

battery level indicator (control panel) and the
configured level of assistance by the indicator
for the configured level of assistance. The
ebike is ready to ride.
 If the battery capacity is less than 5%, the
battery level indicator will remain dark. Only
the control panel indicates whether the drive
system is switched on or not.
If the drive system is switched on, the drive is
activated as soon as the pedals are moved with
sufficient force (except if the selected level of
assistance is "OFF"). The motor power is based
on the level of assistance selected on the control
panel.
6.17.2 Switching off the electric drive
system
As soon as the rider stops pushing the pedals in
normal mode or reaches a speed of 20mph, the
drive system switches off the assistance system.
The assistance system starts up again when you
push the pedals and your speed is less than
20mph.
The system switches off automatically ten minutes
after the last command.
There are two options for switching off the drive
system manually.
On-Off button (control panel)
 Press the On-Off button (control panel) briefly
(< 3 seconds).
On-Off button (battery)
 Press the On-Off button (battery).
 The battery level indicator (control panel) and
the indicator for the selected level of
assistance go out.
 The ebike is switched off.
Operation
121