6.5.18.10 Adjust on-board computer
The ebike is stationary. You cannot open and
adjust the settings while riding.
The display is inserted and shows the start
screen.
1 Open S T A T U S S C R EE N .
2 Press the Select button.
The settings menu is displayed.
Menu
Submenu
My eBike
→
<Range reset>
→
<Auto trip reset [Current value]>
→
<Wheel circumf.>
→
<Components>
System
→
<Language>
→
<Units>
→
<Time>
→
<Time format>
→
<Brightness>
→
<Settings reset>
Information
→
<Contact>
→
<Certificates>◦
Table 41: Basic structure of Kiox300 menu and sub-menu
Use the Plus and Minus buttons to select the
required setting.
Press the Select button to confirm.
Use the Back button to return to the previous
menu.
Follow the instructions on the on-board
computer.
About these operating instructions
6.5.18.11Selects the language
1 Open <System> menu item.
2 Open < Language> sub-menu item.
3 Follow the instructions on the on-board
computer.
The language has been selected.
6.5.18.12Adjusting the clock
1 Open <System> menu item.
2 Open <Time> sub-menu item.
3 Follow the instructions on the on-board
computer.
The time has been set.
6.5.18.13Adjusting the time format
1 Open <System> menu item.
2 Open <Time format> sub-menu item.
3 Follow the instructions on the on-board
computer.
The Time Format is set.
6.5.18.14Selecting units
1 Open <System> menu item.
2 Open <Units> sub-menu item.
3 Follow the instructions on the on-board
computer.
The unit of speed is displayed in the selected
km/h or mph format.
6.5.18.15Setting the brightness
1 Open <System> menu item.
2 Open <Brightness> sub-menu item.
3 Follow the instructions on the on-board
computer.
The brightness has been set.
111