Checking The Stem And Handlebars; Checking The Connections; Checking Stem Is Firmly In Position; Checking For Headset Play - Bosch BULLS ICONIC EVO TR 1 750 Operating Instructions Manual

5.3.6

Checking the stem and handlebars

5.3.6.1 Checking the connections

1 Stand in front of the ebike. Clamp the front
wheel between your legs. Grasp the handlebar
grips.
2 Try to twist the handlebars against the
direction of the front wheel.
 The stem must not move or twist.
3 If the stem can be twisted, check fastening.
 If the stem cannot be fastened, contact your
specialist dealer.

5.3.6.2 Checking stem is firmly in position

1 Press full body weight on the handlebars.
 The handlebars must not move downwards in
the fork.
Stem with clamping lever version I
2 If the handlebars should move, increase the
lever tension in the clamping lever.
3 Turn knurled nut in a clockwise direction with
the clamping lever open.
4 Close clamping lever and check stem is firmly
in position again.
5 If the handlebars cannot be fastened, contact
your specialist dealer.
Stem with clamping lever version II and stem
with screw
 If the handlebars cannot be fastened, contact
your specialist dealer.

5.3.6.3 Checking for headset play

1 Place the fingers of one hand on the upper
headset cup. Pull the front wheel brake with
the other hand and try to push the ebike
backwards and forwards.
Keep in mind that there may be noticeable
play due to worn-out bearing bushes or
brake pad backlash in suspension forks and
disc brakes.
 The headset cup halves must not move
towards one another.
2 Set bearing clearance as per the stem repair
manual as quickly as possible as otherwise the
bearing will become damaged. Contact
specialist dealer.

ebike sale

5.4
 Complete ebike pass on the operating
instructions envelope.
 Note down the manufacturer and the number of
the battery key.
 Adjust the ebike to the rider; see Section 6.5.
 Adjust the kickstand and shifter.
 Brief the operator or rider on all the ebike's
functions (see Section 6.3).
Assembly
71