Table of Contents
Advertisement
HYDROK
Installation
76
WARNING
Serious crushing injuries caused by reaching into
the coupling / slot area in the clamping head or
into the changing fixture!
During actuation, never reach into the coupling /
slot area in the clamping head or into the chang-
ing fixture.
3.
Install the clamping head in the product with an appro-
priate changing fixture. For this the anti-twist devices in
the clamping taper of the product and the grooves in the
clamping head must be aligned.
4.
Unfasten and remove the changing fixture.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
