HYDROK
Use and limits of use
Brief des-
Unit
Explanation
ignation
Clamping force supplement for rotational
compensation
Density of workpiece
Feed / rotational movement of drilling op-
eration
Transverse force
Maximum permitted transverse force
Radial clamping force
Required radial clamping force
Clamping force to prevent the workpiece
getting levered out
Clamping force to absorb the machining
forces and torques during turning and/or
drilling operations towards the chuck axis
Tailstock force
Maximum tailstock force
Specific cutting force
2
Total chuck length
Unclamping length
Center of gravity distance between
»Workpiece - clamping point«
Distance, »radial bore machining - clamp-
ing point«
Clamping length
The minimum clamping length required
Total clamping length
Workpiece length
Clamping head, front-end length
Distance between »Machining point -
clamping point« when turning
Mass of the clamping head
Drilling operation torque
Order hotline +49 7144.907-333
35