Table of Contents
Advertisement
HYDROK
Installation
70
DANGER
Serious injuries caused by projectile workpieces
when the hydraulic ports are connected up incor-
rectly!
The hydraulic connections on the machine / the
baseplate and the product must be connected up
correctly.
The »Clamping« hydraulic ports on machine /
baseplate and product must be connected to-
gether. The same applies to the »Release« ports.
WARNING
Serious injuries can be caused by escaping media
when seals and damaged / missing!
Replace missing or damaged sealing elements.
Ensure that the sealing elements do not fall out or
get damaged during installation / removal, and
apply a thin coat of grease if necessary.
5.
Fit the product to the machine table / the base plate. The
hydraulic ports on the machine / base plate and product
must be aligned.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
