Transfer Coord Data To Job - Kolida KTS-442UT Series Manual

(3)Choose the job name and press ENT to start
input.
(4)Finish the imputting and return to previous
menu

20.1.11 Transfer coord data to job

User can imput coordinate data into working job.
Operating Procedure
⑴ Select "1. JOB" in the "Memory Mode
Screen" and press ENT (or press numeric key 1),
the "JOB Management Screen" is displayed.
Enter page 2
⑵ Select "7. Key in Coord." then press ENT (or
press numeric key 7).
(3)
Choose a Job name or Create a new job name.
(or press LIST to choose from local disk or SD
card).
OK to Confirm.
Comms input
Transfer: USB
Job: A \ job. Job
Receiving
Mem./ JOB (2)
1 Comms input
2. Key in Coord.
Operation
Mem./ JOB (1)
1 JOB selection
"1. JOB"
2. Coord. read JOB
+
3. JOB Export
ENT
4. Coord. import
5. Comms Output
Mem./ JOB (2)
6. Comms input
7. Key in Coord.
"7. key in
Select a job
coord"
+ Job :
OK
LIST
Select a job
Job :
OK
LIST
STOP
Display
OK
J0B1
OK
137