Table of Contents
Advertisement
14
www.raider.bg
concealed live conductors, hold the power tool only for electrical insulated handles. When the
workpiece comes into contact with live conductors, it is transmitted through the metal parts of the
cordless shaver and this may result in electric shock.
1.5.4. Use suitable utensils to locate pipelines that may be hidden beneath the surface, or
contact your local supply company. Contact with live conductors may result in fire and electric
shock. Damage to a pipeline can cause an explosion. Damage to the water supply system results
in extensive material damage and may cause electric shock.
1.5.5. Hold the machine firmly.
1.5.6. Regularly clean the ventilation openings of your shrubbery battery cutter.
1.5.7. Use only the recommended battery and charger.
1.5.8. Use a soft, dry cloth to clean the cordless shaver. Never use any solvent or alcohol.
2. Functional description and purpose.
The cordless shrub is a handheld power tool powered by a battery. It is driven by a direct current
collector motor with permanent magnets and a planetary gearbox with cylindrical gears and is
intended for trimming and shaping shrubs at home. The use of a cordless shrub for bushes for
activities other than its intended use is not permitted.
The use of the power tool is not permitted for activities other than its intended use!
3. Assembling the elements of the battery shrubber and putting it into service.
Some parts of the cutter are disassembled to reduce the volume of the package during transport.
4. Maintenance and storage (not included).
4.1. After use, remove the battery from the cutter and check for damage;
4.2. When not in use, do not store the machine within the reach of children;
4.3. Use only RAIDER spare parts and accessories recommended by the manufacturer;
Once the machine is switched off, the blade continues to move for a while inertia! Wait until the
motor rotates and the blade stops completely before working on the cutter!
Never try to stop the blade from rotating!
Always wear safety gloves when carrying out activities near the knife!
Follow maintenance procedures regularly to ensure long lasting and reliable use of the power
cutter. Check periodically for noticeable defects, such as loose or damaged knife and loose screw
connections. Make sure that the covers and safety equipment are in good working order and are
properly installed.
To clean the tool, remove the battery (not included) and only use a soft soap and a damp cloth
to clean the tool. Do not immerse the instrument in water or wash it with a hose. Do not allow any
liquid to enter inside. Do not clean with a water jet.
5. Start the cutter
5.1. Turn on:
- Press and hold the safety key located on the auxiliary handle (3).
- Press the power switch (4).
5.2. Shutdown:
Release one of the two buttons.
5.3. Cutting hedges
The trapezoidal profile of the blade corresponds to the natural growth of the plants and leads
to optimal hedging.
In order to promote the dense growth of young hedges, only half of the new shoots need to be
cut.
If the hedge has already reached the desired height, the new shoots can be completely removed.
Start trimming from the bottom of the bush to the top. Trim the top in your preferred shape, in a
straight horizontal shape, such as a roof or rounded.
If the blades are clogged or blocked, stop the engine immediately, remove the battery and then
remove the object from the jammed knife.
Attention! Metal obstacles such as fences, etc., can damage the cutting blades.
Advertisement
Table of Contents
