G.T.Power C6D Pro Manual page 8

• The Lithium battery prefers a partial rather than a full discharge. Frequent full discharges
should be avoided if possible. Instead, charge the battery more often or retain normal
voltage.
• The brand-new NiCd battery pack is partially useful with its capacity until it has been
subjected to 10 or more charge cycles in any case. The cyclic process of charge and
discharge will lead to optimise the capacity of battery pack.
Those warnings and safety notes are particularly important. Please follow the instructions
for a maximum safety; otherwise the charger and the battery can be damaged violently. And
also it can cause a re to injure a human body or to lose the property.
voltage level:
NiCd/
allowable fast charge current:
NiMH
discharge voltage cut o level:
voltage level:
max.charge voltage:
LiIon
allowable fast charge current:
min.discharge voltage cut o level:
voltage level:
max.charge voltage:
LiPo
allowable fast charge current:
discharge voltage cut o level:
voltage level:
max.charge voltage:
LiFe
allowable fast charge current:
discharge voltage cut o level:
voltage level:
max.charge voltage:
LiHV
allowable fast charge current:
min.discharge voltage cut o level:
voltage level:
Pb
max.charge voltage:
(Lead-
allowable fast charge current:
acid)
discharge voltage cut o level:
1.2V/cell
1C~2C
depends on the performance of cell
0.85V/cell
(NiCd)
3.6V/cell
4.1V/cell
1C or less
2.5V/cell or higher
3.7V/cell
4.2V/cell
1C or less
3.0V/cell or higher
3.3V/cell
3.6V/cell
4C or less(e.g. A123M1)
2.0V/cell or higher
3.8V/cell
4.35V/cell
1C or less
3.0V/cell or higher
2.0V/cell(Lead-acid)
2.46V/cell
0.4C or less
1.50V/cell or higher
18
, 1.0V/cell
(NiMH)